A blocked toilet can be frustrating, but the good news is that many blockages are relatively easy to fix. Often, it’s simply a build-up of toilet paper or something that’s been accidentally flushed, and a few simple tools are all you need to get things working again.
Here’s how to unblock a toilet at home, what to try for more stubborn blockages and when it’s best to call a plumber.
Before You Start: Avoid Flushing Again
If your toilet isn’t draining properly, resist the temptation to flush again. This can cause the water level to rise and potentially overflow.
If the water is getting close to the top of the bowl, turn off the water supply using the small valve behind the toilet. Then, grab some gloves and a couple of old towels before getting started.
How to Clear a Blocked Toilet
There are a few simple methods worth trying before calling in a professional.
1. Start with a Plunger
A plunger is usually the easiest and most effective way to clear a blocked toilet. For the best results, use a toilet plunger with a rubber flange, which creates a better seal than a standard sink plunger.
Position the plunger over the drain opening and push down gently to create a seal. Then plunge firmly for around 15–20 seconds before checking whether the water level drops.
You may need to repeat this a few times to loosen the blockage completely.
2. Try Dishwashing Liquid and Warm Water
If you don’t have a plunger handy, dishwashing liquid and warm water may help with minor blockages.
Add a generous amount of dishwashing liquid to the bowl, followed by a bucket of hot (not boiling) water, provided there’s enough room in the bowl. Leave it for around 10–15 minutes to see if the blockage begins to loosen.
Avoid boiling water, as sudden temperature changes can damage the porcelain.
How to Unblock a Badly Blocked Toilet
If the usual methods haven’t worked, the blockage may be further down the pipe.
One option is to use a toilet auger, a flexible tool designed to reach blockages beyond the toilet bowl. You can find these at most hardware stores.
Carefully feed the auger into the toilet, turning the handle as you go to help break up or retrieve the blockage. Once you’ve finished, slowly remove the tool and check whether the water drains normally.
Avoid using makeshift tools like wire coat hangers, as these can scratch the porcelain or damage the toilet.
What Should You Avoid?
When trying to fix a blocked toilet, a few common mistakes can make the problem worse:
- Chemical drain cleaners: These can damage certain pipes and pose a safety risk.
- Repeated flushing: This can cause the water level to rise without clearing the blockage.
- Flushing wipes: Even products labelled ‘flushable’ can contribute to blockages. Stick to toilet paper only.
When Should You Call a Plumber?
While many minor blockages can be cleared at home, some problems need professional attention.
It’s worth calling a plumber if:
- Your toilet keeps blocking, even after you’ve cleared it
- Other drains around your home are also running slowly
- You notice gurgling sounds coming from nearby drains
- Water is backing up through your shower or outdoor drains
- There’s an ongoing unpleasant smell coming from the drains
These signs can point to a blockage deeper in your plumbing system, potentially caused by tree roots or problems with the main sewer line.
At O’Shea Plumbing, we help Melbourne homeowners identify and resolve blocked toilets, including more complicated drainage issues. Our experienced blocked toilet plumbers can locate the source of the problem and recommend the best way to get everything working properly again.