If you’ve noticed an unpleasant smell coming from your bathroom, there’s a good chance it’s coming from one of the drains. Smelly drains are one of the most common plumbing issues in Melbourne homes, and while they’re never pleasant, the cause is often simple to find and fix.
Some bathroom drain smells can be sorted in a few minutes with a tap and a bit of cleaning. Others point to a problem further down the line that needs a plumber.
At O’Shea Plumbing, we track down drain smells across Melbourne all the time, so here’s what you need to know about where they come from, what you can safely try at home and when to give us a call.
Why do bathroom drains smell?
Every drain in your bathroom has a trap underneath it. It’s the curved section of pipe that holds a small amount of water, and that water acts as a seal. It stops gases from the sewer travelling back up the pipe and into your home.
When that seal is working, you shouldn’t smell a thing. Most bathroom drain smells happen for one of two reasons: the water seal has been lost, or something inside the pipe is breaking down and giving off an odour. Working out which one it is will point you to the fix.
Quick checks you can do yourself
Before calling a plumber, start with these. They’re safe, easy and fix more smelly drains than you might expect.
Run the tap in rooms you don’t use often
A floor waste or shower that hasn’t been used in a while can dry out. Once the water in the trap evaporates, there’s nothing stopping sewer gas from coming straight up. It happens a lot in spare bathrooms, ensuites in guest rooms and homes that have been empty over a holiday.
Run the shower or pour a jug of water down the floor waste for a minute to refill the trap. If the smell fades over the next hour or so, you’ve found your culprit. Running water through those drains once a week will stop it coming back.
Clean out the shower drain
A smelly shower drain is usually down to hair, soap scum and skin cells collecting just below the grate. Over time, this builds into a slimy layer that gives off a musty, rotten smell.
Lift the grate, pull out what you can with gloves or a cheap drain hair tool, and give the grate and the top of the pipe a scrub with warm, soapy water. Finish by running hot (not boiling) water through for a minute or two. Boiling water can soften PVC pipe joints, so it’s best avoided.
Check the basin overflow
That small hole near the top of your basin is easy to forget, but toothpaste, soap and grime can collect inside it. A bottle brush and some warm, soapy water will usually clear it.
Look around the base of the toilet
If the smell seems strongest near the toilet, the seal where the pan connects to the sewer pipe may have worn or shifted. Signs include a toilet that rocks slightly, water around the base after flushing or staining on the floor. This is a quick job for a plumber, and it’s worth getting done early as a leaking seal can damage your flooring.
What to avoid
It’s tempting to grab a strong chemical cleaner, but we’d recommend leaving it on the shelf. Harsh drain chemicals can damage older pipes and seals, and they often mask the smell for a few days without fixing the cause. If the simple cleaning steps above haven’t worked, the problem is usually beyond what a cleaner can reach anyway.
When it’s more than a quick fix
If you’ve refilled the traps, cleaned the drains and the smell is still there, it’s likely coming from somewhere further down the system. These are the causes we find most often.
A blocked vent pipe
Your plumbing has vent pipes that let air into the system, usually running up through the roof. When a vent is blocked by leaves, a bird’s nest or debris, water draining from one fixture can suck the water out of the traps in another. You might hear gurgling from the shower or basin when the toilet flushes, followed by a sewer smell in the bathroom.
A partial blockage further down the line
A build-up of hair, soap, wipes or tree roots in the pipes under your home slows the flow of waste. Water sits in the pipe longer and starts to smell, and that odour can make its way back up into the bathroom. Slow drains, gurgling and the smell getting worse after a shower are all clues. Our team regularly clears blocked drains in Melbourne and can find exactly where the blockage is sitting.
A cracked or damaged sewer pipe
Older clay sewer pipes can crack with age, ground movement or tree roots. Gas escapes into the soil around the pipe and can find its way into your home through gaps in the floor or walls. A persistent sewer smell in the bathroom that doesn’t seem to come from any one drain is often a sign of this.
A leaking shower base
If your bathroom has a damp, musty smell rather than a sewer smell, water may be getting under the shower base through a failed seal or waterproofing. You might also notice loose tiles, cracked grout or staining on nearby walls.
How to get rid of drain smell for good
Knowing how to get rid of drain smell is mostly about working out the cause first. For dried-out traps and grimy grates, regular use and a quick clean are all it takes. For anything deeper, a CCTV drain camera is the best next step. It lets us see inside the pipes, find the blockage or damage and fix the right thing the first time.
From there, we’ll usually clear the line with high pressure water jetting, clear or repair the vent, or talk you through options if a pipe needs repairing. We’ll always explain what we’ve found and what it means before any work goes ahead.
A quick word on safety
If the smell is strong and sudden, open a window and keep the room well ventilated. Sewer gas in a small space isn’t something to sit with, and a strong smell that won’t clear is a good reason to call a plumber sooner rather than later.
Book a drain check
If the smell keeps coming back, it’s worth finding out why. Get in touch with O’Shea Plumbing to book a drain check, and we’ll find where it’s coming from and get your bathroom smelling fresh again.